Other Settings & Features
Log Settings (Syslog)
If you have a Syslog Server on your LAN, this screen allows you to configure the Access Point to send log data to your Syslog Server.
Figure 56: Log Settings (Syslog) Screen
Data - Log Settings Screen
Syslog Server | Select the desired Option: |
| • Disable - Syslog server is not used. |
| • Broadcast - Syslog data is broadcast. Use this option if |
| different PCs act as the Syslog server at different times. |
| • Send to specified Syslog Server - Select this if the same |
| PC is always used as the Syslog server. If selected, you |
| must enter the server address in the field provided. |
|
|
Syslog Server Address | Enter the name or IP address of your Syslog Server. |
|
|
Minimum Severity Level | Select the desired severity level. Events with a severtiy level |
| equal to or higher (i.e. lower number) than the selected level |
| will be logged. |
|
|
75
