Security Measures | Page 1 of 4 |
Security Measures
Use these features to protect your data.
Other security measure
Set [Embedded Security (TPM)]: For further information, refer to the Installation Manual of "Trusted Platform Module (TPM)".
Setting the Supervisor Password/User Password
Set the Supervisor Password before setting the User Password.
1.Start up the Setup Utility. (
Starting the Setup Utility)
2.Select [Security].
3.Select [Set Supervisor Password] or [Set User Password], and press «Enter».
4.Enter your password in [Create New Password] and press «Enter».
When the password has been set, you need to enter your password in [Enter Current Password] and press «Enter».
To disable the password, leave the input field empty and press «Enter».
5.Enter your password again in [Confirm New Password] and press «Enter».
6.Press «F10», and then select [Yes] and press «Enter».
C A U T I O N
-Do not forget your password. If you forget your Supervisor Password, you will not be able to use your computer. Contact Panasonic Technical Support.
-When running the Setup Utility, do not leave and go away from your computer even for a short time, since other people may set or change the password.
N O T E
-The password will not be displayed on the screen.
-You can use up to 32 alphanumeric characters (including spaces).
The case (upper/lower) is distinguished.
Use only the upper horizontal row of numeric keys to input your password.
file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C...
