Wireless Switch Utility | Panasonic CF-53ASUZX1M specification

Disabling/Enabling Wireless Communication

Page 3 of 6

-To use wireless communication, set the wireless devices ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled] (default) in the [Advanced] menu of the Setup Utility ( Wireless Configuration).

-When you set [Wireless Switch] to [Disabled] in the [Advanced] menu of the Setup Utility, the Wireless Switch Utility icon will not appear if you click on the notification area. All

wireless equipment (wireless LAN, Bluetooth, wireless WAN) will remain ready irrespective of the wireless switch setting.

-It may take some time to turn off wireless communication after switching the wireless switch off.

-If the setting is changed in [Device Manager], the display will be changed accordingly.

-You can check the wireless LAN communication status in Intel® PROSet/Wireless Software. Perform the following procedure.

Click (Start) - [All Programs] - [Intel PROSet Wireless] - [WiFi Advanced Statistics].

-<Only for model with Intel® Centrino® Advanced N-6205>

®PROSet/WirelessPerform either of the following procedures to check the status in Intel

Software.

Double-click , or on the notification area.

Click [start] - [All Programs] - [Intel PROSet Wireless] - [WiFi Connection Utility].

-<Only for model with Atheros AR928X>

Right-click , , , , or on the notification area, and click [Open Atheros Client

Utility].

Click [start] - [All Programs] - [Atheros] - [Atheros Client Utility].

*1 : Windows XP: standby

Wireless Switch Utility

This utility allows you to control the function of the wireless switch. This utility also allows you to enable or disable wireless devices from a pop-up menu. In the default setting, all wireless devices are enabled.

The Wireless Switch Utility icon

The icon appears when click on the notification area. It shows the status of wireless devices.

file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C... 2011-11-29

Image 107

Panasonic CF-53ASUZX1M manual Wireless Switch Utility icon, Only for model with Atheros AR928X

Contents

Reference Manual  Trademarks Descriptions Disclaimer Panasonic Corporation Sound and Video Windows UpdateIntroduction Regarding Windows Useful functions of the Touch Pad Only for CF-53 Series When high-frequency sound occurs  Picture zoom-out/zoom-in «Fn» LCD brightness Display mode switchingKey Combinations Key Function Beeps do not sound if you turn off the speaker sound*4 VolumeOnly for CF-52 Series Speaker on/off «Fn» Activate hibernation Concealed Mode on/offRemaining battery charge Activate sleep*5 Hotkey Settings Click OK You can have different settings for each userDisplay status bar while Fn Key is held down*8  To right-click TouchscreenOnly for model with touchscreen Maintaining the performance of the touchscreen Suggestions About Cleaning the LCD SurfaceHow to use the soft cloth Operation of the touchscreen Do not touch the screen outside of the LCD display area Things to keep in mind when using the touchscreenClean the touchscreen while the computer is powered off Wash the soft cloth when it becomes dirty Perform the following calibration for each user Calibration by an administratorTouchscreen Calibration Calibration by an standard user Perform the touchscreen calibration for each user Run Touch Screen Calibration Utility Click on the notification area, and double-click Installing the utilityHand Writing Utility Starting Hand Writing Utility Windows XP start Windows XP standby Sleep Setting Sleep or HibernationSleep and Hibernation Functions Starting Up Your Computer Quickly Standby / Hibernation Precautions To enter sleep*3 or hibernation Failing the password input while resuming from hibernationFailing the password input while resuming from sleep*2 Entering/Resuming from Sleep or Hibernation While the computer is entering sleep*3 or hibernation Do not To resume from sleep*3 or hibernation U T I O N T E  Other security measure Setting the Supervisor Password/User PasswordSecurity Measures Preventing Your Hard Disk Data from Being Read or Written When you have your hard disk drive repairedPreventing Your Computer from Unauthorized Use This does not work for USB CD/DVD drive Using Intel Identity Protection Technology Intel IPTDisabling CD/DVD Drive Security Measures We recommend charging the battery no more than once per day Battery PowerImportant Battery Tips How to use the battery with minimal deterioration Use the battery in the high temperature mode Things to keep in mind when using the battery pack Battery Indicator After logging on to Windows Press «Fn» + «F9» Checking the Remaining Battery ChargeHigh temperature mode Computer behavior with low battery Correcting the Battery Display Battery Recalibration Reverse the computer and remove the cover Replacing the Battery Pack Remove/Insert the battery pack Slide the cover back U T I O N CD/DVD drive handling care Handling PrecautionsCD/DVD Drive Disc handling care To clean discs Disc Information How to hold a disc Recommended discs for writing DVD discs you can use for writing  DVD-Video with multiple region codes Using DVD MediaRegion code setting Inserting/Removing a Disc Close the tray Insert/Remove a disc For AutoPlay CD/DVD Power-saving mode Changing the CD/DVD Drive Letter Running WinDVD To access the online manualWinDVD DVD Discs Created Using a DVD Recorder Applicable Media Using Windows FeatureUsing Roxio Creator LJB Writing to CD/DVD Format type Usage PrecautionsUsing DVD-RAM for Windows When an external CD/DVD drive has been connected Writing to DVD-RAM Using DVD-RAM for Windows XPFormatting method Logical format method Logical format type Support Information If you have uninstalled Roxio Creator LJB accidentally To insert the card PC Card / ExpressCardInserting/Removing the Card To remove the card Disable the card function Open the cover and remove the card Windows XP standby Inserting/Removing the SD Memory Card SD Memory CardSD Memory Card Information Preparation Remove the card SD Memory Card Insert the Smart Card with the contact part a in front Smart CardInserting/Removing the Smart Card Only for model with Smart Card slot Press the eject button B. The Smart Card pops out Inserting/Removing the RAM Module RAM Module  Do not use sleep*1 or hibernation Insert/Remove the RAM module Set the cover and battery pack Set the cover correctly and tighten the screw firmly Port Replicator External Display Switching the display modePress « » + «P» or «Fn» + «F3» Click the display mode Press «Fn» + «F3» Supplied with the monitor Device ResolutionDisplay Selector Only for CF-53 Series Secondary Screen Position Click Apply to enable the settings Click OKChanging the Sound Output Destination External Display To connect the USB device Connecting/Removing USB DevicesDisable the USB device USB Devices Only for model with Smart Card slot If you double-click Remove the USB device Windows XP standby Only for model with Ieee 1394 port Ieee 1394 DevicesTo connect Ieee 1394 device To remove Ieee 1394 device Slide your finger toward yourself How to Use the Fingerprint ReaderFingerprint Reader Fingerprint’s Outline Overview Performed by each user User Fingerprint Enrollment PrecautionsPerformed by the Computer Administrator 1. TPM Installation Security Functions TPM Installation Installation If the Invalid TPM status message is not displayed More Advanced Security Register the Supervisor Password Set the High Security Level BackupUseful Information  File used by each user  Password used by each user Limitations in Use Handling & Maintenance Sensor Scrolling Feature is not supported Delete Fingerprint Data Uninstall Protector SuiteDeleting Initializing Owner’s Data Deleting the passport Log on to Windows as an AdministratorWe recommend you set the backup password Starting Over Restore or create passport Only for model with Modem Connecting the Internal Modem with a Telephone JackModem Ring Resume Function To enable this function To set the time to return the computer to sleep*2 Modem Open the cover and connect the cable Connecting LAN To check the Local Area Connection status Enabling the Power On by LAN function Power On by LAN/Wake Up from wired LAN Enabling/Disabling the Wake Up from wired LAN function T E To enable wireless communication Disabling/Enabling Wireless CommunicationWireless Switch To disable all wireless communication To check the wireless communication status Only for model with Atheros AR928X Wireless Switch UtilityWireless Switch Utility icon  Turns on the following device Wireless Connection Disable UtilityTo enable or disable particular wireless devices To change the function of the wireless switch Status indication Installing the utilityChecking the status of the wireless connection  Exit Menu Monitoring LAN Cable on  Monitoring LAN Cable OFF Only for model with wireless LAN Wireless LAN Turning on/off the wireless LAN communication Using the Wireless LAN Function Double-click / / on the notification area Setting the wireless LAN access pointSetting the profiles Click Close  When or is displayed, skip step When 802.11a is Enabled Disabled Wireless LAN Only for model with Bluetooth Bluetooth Click Start*1 All Programs Bluetooth Bluetooth User’s Guide Using the Bluetooth FunctionTo check the Bluetooth communication status Turning on/off the Bluetooth communication Inserting/Removing a SIM Card Wireless WANOnly for model with wireless WAN To insert a SIM card CF-53 Series CF-52 Series Push the card To remove a SIM cardClose the cover B Wireless WAN Wireless WAN Manager Click Help Inserting/Removing the Hard Disk Drive Hard Disk Drive CF-52 Series Insert/Remove the hard disk drive  To insert Insert the Battery Pack Replacing the Battery Pack Hard Disk Drive When you start the Setup Utility with User Password Setup UtilityStarting the Setup Utility When you start the Setup Utility with Supervisor Password Product Information Bios InformationMain Configuration Main Menu Setup Utility LED Advanced Menu LAN Peripheral Configuration Boot Menu Security Menu To change the boot orderBoot Option Priorities Boot Prompt Configuration Save Options Boot OverrideExit Menu Icon Enlarger Click Start*1 All Programs Panasonic Loupe Utility Click OK Using the Loupe UtilityLoupe Utility Activating the Loupe Utility Setting the Loupe Utility Autorun Window shape Hardware that can be checked using the PC-Diagnostic Utility Hardware Diagnostics Operations Touch pad operations Internal keyboard operations Regarding the PC-Diagnostic Utility Press «F9» Running the Diagnostic CheckDiagnostic Utility Connect the AC adaptor, and turn on the wireless switch T E Click to start the diagnostic check Restoring the Hard Disk Data Hard Disk Backup/Restore FunctionCreating a Backup of the Hard Disk Data Click Restart Start up System Recovery OptionsIf you backup your files, click Back up now  To perform from Advanced Boot Options Input the password, then click OK Click Next Select OS 32 bit or 64 bit Select the disc type Recovery Disc Creation Utility Click OK Click OK on All recovery discs complete. screen Preparation Hard Disk Data Erase Utility After erasing is completed, click OK For localized OS model Technical InformationNetwork Connections and Communications Software About Windows-related files Technical Information Technical Information Solution Error MessageError Message Display Troubleshooting AdvancedShut Down Sound Sleep*1 and Hibernation Troubleshooting Advanced Disc Operation Keyboard Network  Disable the Wireless Connection Disable Utility  Wireless Switch Utility Connecting Peripherals Troubleshooting Advanced Touch Pad / Touchscreen only for model with touchscreen  Perform the Touchscreen Calibration PC Card / ExpressCard only for model with ExpressCard slot Fingerprint Reader only for model with Fingerprint Reader SD Memory CardSmart Card only for model with Smart Card slot Troubleshooting Advanced Troubleshooting Advanced Troubleshooting Advanced Others To save the information as a text file Checking the Computer’s Usage Status To save a copy of the screen as an image file