Sleep and Hibernation Functions | Page 5 of 7 |
Use an external mouse or other peripheral devices.
Connect or disconnect the AC adaptor.
Operate the wireless switch.
Close or open the display.
Insert and remove the SD Memory Card.
Wait until the power indicator blinks green (sleep*3) or goes off (hibernation).
-It may take 1 or 2 minutes to enter sleep*3 or hibernation. Do not touch any key though the screen becomes dark.
-At the beep*4, immediately release the power switch. After releasing the switch, do not operate it until the power indicator blinks or goes off.
If you press and hold the power switch for longer than 4 seconds, the computer will forcibly shut down and unsaved data will be lost even if you have set [When I press the power button] to any item in [Change what the power button does].
If you press and hold the power switch for longer than 4 seconds, the computer will forcibly shut down and unsaved data will be lost even if you have set any item in [When I press the power button on my computer]. (
Setting Sleep or Hibernation)
In sleep*3 or hibernation
-Do not attach or remove peripheral devices. Doing so may cause malfunction.
-Power is consumed in sleep*3. Power consumption may increase when a PC Card is inserted. When power is exhausted, the data retained in memory will be lost. Connect
the AC adaptor when using the sleep*3 function. - Do not turn on/off the wireless switch.
To resume from sleep*3 or hibernation
1.Open the display, or press the power switch (A).
file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C...
