Wireless LAN | Page 2 of 6 |
-When you connect this computer to a port replicator compatible with external antenna, you can switch the internal antenna to the external antenna, or vice versa.
(
Wireless Antenna Switching)
-You cannot use the wireless LAN function together with the Fast User Switching function.
-The transmission rate will be lower when a microwave oven is used near by.
-To use wireless LAN, set [Wireless LAN] to [Enabled] (default) in the [Advanced] menu of the Setup Utility.
-It may take some time to turn off wireless LAN after switching the wireless switch to off.
Using the Wireless LAN Function
Before using a wireless LAN, turn the wireless LAN communication on.
Turning on/off the wireless LAN communication
1.Slide the wireless switch to turn ON / OFF wireless LAN (
The Wireless Switch).
When turning on wireless LAN
If you cannot turn on wireless LAN using the wireless switch, confirm the Wireless Switch Utility setting, If you cannot turn on wireless LAN in the Wireless Switch Utility, try the following procedure.
1.Click 
or 
on the notification area and click [Open Network and Sharing Center].
2.Click [Change adapter settings].
3.
A standard user needs to enter an administrator password.
When [Disable] is displayed, [Wireless Network Connection] is already enabled.
4.Turn on wireless LAN in the Wireless Switch Utility.
N O T E
-You can use the following procedure instead of turning on wireless LAN in the Wireless Switch Utility.
1.Click 
(Start) - [Control Panel] - [Adjust commonly used mobility settings].
2.Click [Turn wireless on] in [Wireless Network].
When [Turn wireless off] is displayed, the wireless network is already on.
If you cannot select [Turn wireless on], the wireless switch is turned off.
file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C...
