Touchscreen | Page 1 of 5 |
Touchscreen
<Only for model with touchscreen>
You can use the touchscreen function to perform the same operation as the touch pad and mouse. Touch the screen surface with your finger or the stylus (included).
For further information, click 
(Start) - [Control Panel] - [Hardware and Sound] - [Pen and Touch] - [Flicks] - [Practice using flicks].
To right-click
1. Touch and hold with the stylus, or touch and select the right button of "touch pointer".
1.Click 
on the notification area. 
changes to 
.
2.Click the object you want to 
returns to 
.
N O T E
-The touchscreen function does not work in the Setup Utility.
-You need to make the following setting for each user.
1.Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Panel Configuration].
2.Select the settings, and then click [OK].
Do not add a check mark to [Delete Cursor] since the display may be distorted.
-If you add a check mark for [Use] in [Hold [Ctrl] key down + Touch the screen] of [Touch Panel Configuration], touching the screen may always be recognized as a
-The touchscreen function does not work in the Setup Utility, in the full screen of [Command Prompt].
file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C...
