Troubleshooting (Advanced) | Page 6 of 18 |
network.
Cannot check the computer’s MAC address.
Setup Utility.
Follow the steps below.
1.Click 
(Start)*3 - [All Programs] - [Accessories] - [Command Prompt].
2.
Input "getmac /fo list /v", and press «Enter».
Insert a space between "fo" and "list", and between "list" and "/v".
Input "ipconfig /all", and press «Enter».
3.Wireless LAN’s MAC address:
Make a note of the
Wired LAN’s MAC address:
Make a note of the
4.Input "exit", and press «Enter».
*3 : Windows XP: [start]
Wireless Communication (only for model with wireless LAN/Bluetooth/wireless WAN)
Cannot connect to a network.
Slide the wireless switch to turn on the wireless devices.
Set the device ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled] in the [Advanced] menu of the Setup Utility (
Wireless Configuration).
Access point is not detected.
Disable the Wireless Connection Disable Utility.
Restart the computer.
Shorten the distance between the computer and the access point, and try the detection again.
Confirm the following settings:
[Wireless LAN] in the [Advanced] menu of the Setup Utility Confirm that [Wireless LAN] is set to [Enabled].
Wireless Switch
Slide the wireless switch to ON.
file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C...
