Setup Utility | Page 8 of 9 |
Underlined items are the factory presets.
Boot Prompt Configuration |
|
Setup Utility Prompt | Disabled |
When [Setup Utility Prompt] is set to [Disabled], the message "Press F2 for | Enabled |
Setup / F12 for LAN" is not displayed on [Panasonic] boot screen. However, F2 and F12 will work even if the message is not displayed.
Boot Popup Menu | Disabled |
| Enabled |
Password On Boot | Disabled |
| Enabled |
| Auto |
Password On Reboot | Disabled |
| Same as Boot |
Password On Resume | Disabled |
| Enabled |
| Auto |
Boot Device On Hibernation Resume | Try prior devices |
| Hard Disk only |
Set Supervisor Password | Enter the sub- |
| menu. |
Hard Disk Lock | Disabled |
Can be changed only when [Set Supervisor Password] is set. | Enabled |
User Password Protection | No Protection |
| Protected |
Set User Password | Enter the sub- |
| menu. |
Intel(R) | Inactive |
| Active |
Suspend mode transition
Embedded Security(TPM)
Only for model that supports TPM
For information on TPM, refer to the Installation Manual of "Trusted Platform Module (TPM)".
Click 
(Start), input "c:\util\drivers\tpm\readme.pdf" in [Search programs and files], and press «Enter».
Disabled
Enabled
Enter the sub- menu.
file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C...
