CD/DVD Drive | Page 2 of 9 |
Do not place items other than discs on the tray.
Do not access the drive until after the tray is closed.
Set this computer on a horizontal plane.
While the CD/DVD drive is being accessed
Do not open the CD/DVD drive or move the computer while the CD/DVD drive is being accessed. Doing so could cause the disc to shift position and this may damage the disc, or cause the CD/DVD drive to malfunction. In addition, after running an application involving access to a disc, close the application before opening the CD/DVD drive.
Set this computer on a horizontal plane.
Disc handling care
Do not use deformed, warped, or irregularly shaped discs.
Reading of disc may not be possible depending on the disc conditions (cracks, dirt, modification, data recording quality, copy protection, recording equipment/software that was used to create the disc, etc.)
Before using a disc, carefully read the operating/handling instructions and package of the disc.
If the discs are not handled appropriately, they may become dirty or scratched. Furthermore the writing speed may get slower and the data may not be correctly written on or read from the disc. Other damage may cause a drive failure.
Note the following precautions.
Do not touch the disc surface (the side with no printing).
Keep the disc surface clean and free from dirt, dust, fingerprints and scratches.
Do not write on the surface of the disc with a ballpoint pen or other writing instrument.
Do not attach stickers to discs.
Do not drop, bend, or place heavy objects on top of discs.
Do not place or store discs in locations exposed to heat, direct sunlight, humidity or dust.
If a disc is brought from a cold to a warm location, condensation may form on the disc. For
When not using discs, keep them in their protective cases or cartridges.
To clean discs
file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C...
