Setup Utility | Page 7 of 9 |
Setting [Fast] will skip the [Panasonic] boot screen normally displayed immediately after the computer is turned on. The time required to display the Windows boot screen will become shorter.
Since the [Panasonic] boot screen is not displayed, press and hold ≪F2≫ or ≪Del≫ and turn the computer on to start the Setup Utility.
If the startup from USB devices is not possible, set [Compatible] and retry. However, setting [Compatible] will require longer time to display the Windows boot screen than setting [Normal].
Boot Option Priorities
Normal
Compatible
Boot Option #1 | USB Floppy |
| Disk*5 |
Boot Option #2 | Hard Disk |
Boot Option #3 | Optical Drive |
Boot Option #4 | LAN |
Boot Option #5 | USB Hard Disk |
Boot Option #6 | USB Optical Drive |
To change the boot order
The default order is [USB Floppy Disk*5] → [Hard Disk] → [Optical Drive] → [LAN] → [USB Hard Disk] → [USB Optical Drive].
Press «Enter» on the boot device you want to change and select the boot device from the following menu.
When a selected boot device in the following menu already exists in either of the [Boot Option (#1 to #6)], the boot device appears at the newly selected position by switching the positions with the original boot device that existed before at the position.
When you select [Disabled] in the following menu, the disabled [Boot Option] is ignored and the boot device in the next [Boot Option] operates.
*5 : The operation is confirmed by Panasonic USB floppy disk drive (optional:
Security Menu
file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C...
