Setup Utility You can make the settings of the computer’s operating environment (password settings, startup
drive selection, etc.)
Starting the Setup Utility
1. Turn on or restart the computer.
2. Press «F2» or «Del» while [Panasonic] boot screen is displayed soon after the
computer starts the startup procedure.
When [Enter Password] is displayed, enter your password.
When you start the Setup Utility with Supervisor Password
You can make the settings of all items of the Setup Utility.
When you start the Setup Utility with User Password
Note the following:
In the [Advanced] and [Boot] menus, you cannot make the settings of all items.
In the [Security] menu, you can change only the User Password when [User
Password Protection] is set to [No Protection]. You cannot delete the User
Password.
In the [Exit] menu, you cannot make the setting of [Load Default Values] and [Boot
Override].
«F9» (Setup Defaults) does not function.
- The [Panasonic] boot screen may not appear when only the external display is being
used. In this case, as soon as the computer starts up, press «F2» or «Del» several times
and start the Setup Utility.
Information Menu
Underlined items are the factory presets.
NOTE
Language English
French
Pa
g
e 1 of 9Setup Utilit
y
2011-11-29file://X:\MÀJ Site Web GouvQc\Novembre 2011 A
j
out de Panasonic\Guides d'usa
g
er\C...