Troubleshooting (Advanced) | Page 9 of 18 |
The RAM module is not recognized.
You do not know the address map for IRQ, I/O port address, etc.
The device connected to the serial port does not work.
Cannot print.
computer. Do not connect it via a USB hub or USB connector of the port replicator. If you have connected to a USB port on the computer, try connecting it to one of the other USB ports.
Set [USB Port] and [Legacy USB Support] to [Enabled] in the [Advanced] menu of the Setup Utility.
Set [Boot Option #1] to [USB Floppy Disk] in the [Boot] menu of the Setup Utility.
Turn off the computer and connect the USB floppy disk drive, and then restart the computer.
Insert the RAM module correctly.
Use the compatible RAM module (
RAM Module).
Check the [Information] menu in the Setup Utility. If the RAM module is not recognized, turn off the computer and reinsert the RAM module.
You can check with the following procedure.
1.Click 
(Start) - [Computer] - [System properties] - [Device Manager].
A standard user needs to enter an administrator password.
2.Click [View] - [Resources by type].
To check the current address map, click [Start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager] - [View] - [Resources by type].
Check the connection.
The device driver may not work. Refer to the instruction manual of the device.
Do not connect 2 mouse devices simultaneously.
Set [Touch Pad] to [Disabled] in the [Main] menu of the Setup Utility.
Set [Serial Port] to [Enabled] in the [Advanced] menu of the Setup Utility.
Check the printer connection.
Turn on the printer.
The printer is not online.
No paper is in the printer tray or there is a paper jam.
file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C...
