Panasonic CF-53ASUZX1M manual When 802.11a is Enabled Disabled

Wireless LAN Page 5 of 6

For further information of Atheros, click [Help] - [Atheros Client Utility Help] in the menu bar.

<Only for model with Intel® Centrino® Advanced N-6205>

Enabling/Disabling the Wireless LAN Standard IEEE802.11a (802.11a)

1.Click on the notification area and click or .

2.Click [802.11a Enabled] or [802.11a Disabled].

N O T E

-In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law.

-The Wireless Switch Utility icon ( or ) indicates the on/off status of wireless LAN and/or Bluetooth and/or wireless WAN, not the setting of IEEE802.11a.

-If IEEE802.11a is enabled or disabled while the computer is connected to an IEEE802.11b/g access point, the connection will be temporarily interrupted.

-You can also change the IEEE802.11a setting in [Device Manager].

1.

Click (Start) - [Computer] - [System properties] - [Device Manager].

A standard user needs to enter an administrator password.

Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].

2.Double-click [Network adapters] and double-click [Centrino(R) Advanced-N 6205 AGN].

3.Click [Advanced], and then select [Wireless Mode] in [Property].

4.Select the settings in [Value].

5.Click [OK].

If you enable or disable 802.11a using the pop-up menu of Wireless Switch Utility, the setting in [Device Manager] will be accordingly changed as below.

Settings in Device Manager	Settings in Wireless Switch Utility
	When 802.11a is	When 802.11a is
	enabled	disabled

file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C... 2011-11-29