Panasonic CF-53ASUZX1M manual If the Invalid TPM status message is not displayed

Fingerprint Reader Page 5 of 12

Installation starts. Follow the on-screen instructions.

4.When the "Protector Suite *.* has been successfully installed." message appears, click [Finish].

At the confirmation message, click [Yes]. The computer restarts.

5.Log on to Windows as an Administrator.

The "Fingerprint software Icon" appears in the notification area.

If the icon does not appear, click .

3.TPM Fingerprint Utility Initialization

Performed by the Computer Administrator.

The "Invalid TPM status" message is displayed by the "Fingerprint software Icon" in the notification area.

If the icon does not appear, click

If the TPM is not being used, skip this step.

1.Click on the "Invalid TPM status" message and then click [Initialize]. Follow the on-screen instructions.

N O T E

-If the "Invalid TPM status" message is not displayed

1.Click (Start)*2 - [All Programs] - [Protector Suite] - [Control Center] - [Settings] - [Advanced Settings] - [Trusted Platform Module (TPM)] - [Initialize]. And then

click (Start)*2 - [All Programs] - [Protector Suite] - [Control Center] - [Identity] - [Multifactor], and choose a method of authentication.

4.User Fingerprint Enrollment

Performed by each user.

1.Double-click the "Fingerprint software Icon" .

2.Carefully read the License Agreement, and then click [Accept].

3.Select an enrollment mode, and click [Apply].

Enrollment mode

You can make the configuration for the enrollment only once during this initialization phase.

Enrollment to the biometric device

All enrolled fingerprints are stored directly in the fingerprint sensor. The user data will be secured by the hardware protection keys obtained by the

file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C... 2011-11-29