PC Card / ExpressCard, To insert the card | Panasonic CF-53ASUZX1M

PC Card / ExpressCard

Page 1 of 4

PC Card / ExpressCard

You can insert the following cards.

ExpressCard/34 or ExpressCard/54 to the ExpressCard slot (A)*1

PC Card Type I (3.3 mm) or II (5.0 mm) to the PC Card slot (A)*2 and (B)

*1 : Only for model with ExpressCard Slot

*2 : Only for model without ExpressCard Slot

For model without ExpressCard Slot, both of upper slot and lower slot are for PC Card.

N O T E

- The following types of card are not supported:

PC Card Type III (10.5 mm), ZV card, SRAM card, FLASH ROM card (excluding ATA interface type), and other cards that require 12 V of operating voltage.

-Do not start up Windows with a storage type of CardBus PC card attached. An error may occur.

Inserting/Removing the Card

To insert the card

1.Open the cover (C), and insert the ExpressCard (D)*3 or the PC Card (E) with the label side up until it securely fits in to the slot.

For further information, refer to the instruction manual of the card.

*3 : Only for model with ExpressCard Slot

For model without ExpressCard Slot, both of upper slot and lower slot are for PC Card.

<CF-53 Series>

file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C... 2011-11-29

Image 57

Panasonic CF-53ASUZX1M manual PC Card / ExpressCard, Inserting/Removing the Card, To insert the card

Contents

Reference Manual Descriptions  Disclaimer Trademarks Panasonic Corporation Introduction Windows UpdateRegarding Windows Sound and Video Useful functions of the Touch Pad Only for CF-53 Series When high-frequency sound occurs  Picture zoom-out/zoom-in Key Combinations Display mode switchingKey Function «Fn» LCD brightness Only for CF-52 Series VolumeSpeaker on/off Beeps do not sound if you turn off the speaker sound*4 Remaining battery charge Concealed Mode on/offActivate sleep*5 «Fn» Activate hibernation Hotkey Settings You can have different settings for each user Display status bar while Fn Key is held down*8Click OK Touchscreen Only for model with touchscreen To right-click How to use the soft cloth Suggestions About Cleaning the LCD SurfaceOperation of the touchscreen Maintaining the performance of the touchscreen Clean the touchscreen while the computer is powered off Things to keep in mind when using the touchscreenWash the soft cloth when it becomes dirty Do not touch the screen outside of the LCD display area Touchscreen Calibration Calibration by an administratorCalibration by an standard user Perform the following calibration for each user Perform the touchscreen calibration for each user Run Touch Screen Calibration Utility Hand Writing Utility Installing the utilityStarting Hand Writing Utility Click on the notification area, and double-click Windows XP start Windows XP standby Sleep and Hibernation Functions Setting Sleep or HibernationStarting Up Your Computer Quickly Sleep Standby / Hibernation Precautions Failing the password input while resuming from sleep*2 Failing the password input while resuming from hibernationEntering/Resuming from Sleep or Hibernation To enter sleep*3 or hibernation While the computer is entering sleep*3 or hibernation Do not To resume from sleep*3 or hibernation U T I O N T E Setting the Supervisor Password/User Password Security Measures Other security measure When you have your hard disk drive repaired Preventing Your Computer from Unauthorized UsePreventing Your Hard Disk Data from Being Read or Written Using Intel Identity Protection Technology Intel IPT Disabling CD/DVD DriveThis does not work for USB CD/DVD drive Security Measures Important Battery Tips Battery PowerHow to use the battery with minimal deterioration We recommend charging the battery no more than once per day Use the battery in the high temperature mode Things to keep in mind when using the battery pack Battery Indicator Checking the Remaining Battery Charge High temperature modeAfter logging on to Windows Press «Fn» + «F9» Computer behavior with low battery Correcting the Battery Display Battery Recalibration Reverse the computer and remove the cover Replacing the Battery Pack Remove/Insert the battery pack Slide the cover back U T I O N Handling Precautions CD/DVD DriveCD/DVD drive handling care Disc handling care To clean discs Disc Information How to hold a disc Recommended discs for writing DVD discs you can use for writing Region code setting Using DVD MediaInserting/Removing a Disc  DVD-Video with multiple region codes Close the tray Insert/Remove a disc For AutoPlay CD/DVD Power-saving mode Changing the CD/DVD Drive Letter To access the online manual WinDVDRunning WinDVD DVD Discs Created Using a DVD Recorder Using Roxio Creator LJB Using Windows FeatureWriting to CD/DVD Applicable Media Using DVD-RAM for Windows Usage PrecautionsWhen an external CD/DVD drive has been connected Format type Using DVD-RAM for Windows XP Formatting methodWriting to DVD-RAM Logical format method Logical format type Support Information If you have uninstalled Roxio Creator LJB accidentally PC Card / ExpressCard Inserting/Removing the CardTo insert the card To remove the card Disable the card function Open the cover and remove the card Windows XP standby SD Memory Card SD Memory Card InformationInserting/Removing the SD Memory Card Preparation Remove the card SD Memory Card Inserting/Removing the Smart Card Smart CardOnly for model with Smart Card slot Insert the Smart Card with the contact part a in front Press the eject button B. The Smart Card pops out Inserting/Removing the RAM Module RAM Module  Do not use sleep*1 or hibernation Insert/Remove the RAM module Set the cover and battery pack Set the cover correctly and tighten the screw firmly Port Replicator Switching the display mode Press « » + «P» or «Fn» + «F3» Click the display modeExternal Display Press «Fn» + «F3» Supplied with the monitor Resolution Display Selector Only for CF-53 SeriesDevice Click Apply to enable the settings Click OK Changing the Sound Output DestinationSecondary Screen Position External Display Disable the USB device Connecting/Removing USB DevicesUSB Devices To connect the USB device Only for model with Smart Card slot If you double-click Remove the USB device Windows XP standby Ieee 1394 Devices To connect Ieee 1394 deviceOnly for model with Ieee 1394 port To remove Ieee 1394 device How to Use the Fingerprint Reader Fingerprint ReaderSlide your finger toward yourself Fingerprint’s Outline Overview Performed by the Computer Administrator 1. TPM Installation PrecautionsSecurity Functions Performed by each user User Fingerprint Enrollment TPM Installation Installation If the Invalid TPM status message is not displayed More Advanced Security Register the Supervisor Password Backup Useful InformationSet the High Security Level  File used by each user  Password used by each user Handling & Maintenance  Sensor Scrolling Feature is not supportedLimitations in Use Uninstall Protector Suite Deleting Initializing Owner’s DataDelete Fingerprint Data We recommend you set the backup password Log on to Windows as an AdministratorStarting Over Deleting the passport Restore or create passport Connecting the Internal Modem with a Telephone Jack ModemOnly for model with Modem Ring Resume Function To enable this function To set the time to return the computer to sleep*2 Modem Open the cover and connect the cable Connecting LAN To check the Local Area Connection status Enabling the Power On by LAN function Power On by LAN/Wake Up from wired LAN Enabling/Disabling the Wake Up from wired LAN function T E Wireless Switch Disabling/Enabling Wireless CommunicationTo disable all wireless communication To enable wireless communication To check the wireless communication status Wireless Switch Utility Wireless Switch Utility iconOnly for model with Atheros AR928X To enable or disable particular wireless devices Wireless Connection Disable UtilityTo change the function of the wireless switch  Turns on the following device Installing the utility Checking the status of the wireless connectionStatus indication  Monitoring LAN Cable on Menu Monitoring LAN Cable OFF  Exit Only for model with wireless LAN Wireless LAN Turning on/off the wireless LAN communication Using the Wireless LAN Function Setting the profiles Setting the wireless LAN access pointClick Close Double-click / / on the notification area  When or is displayed, skip step When 802.11a is Enabled Disabled Wireless LAN Only for model with Bluetooth Bluetooth To check the Bluetooth communication status Using the Bluetooth FunctionTurning on/off the Bluetooth communication Click Start*1 All Programs Bluetooth Bluetooth User’s Guide Wireless WAN Only for model with wireless WANInserting/Removing a SIM Card To insert a SIM card CF-53 Series CF-52 Series To remove a SIM card Close the cover BPush the card Wireless WAN Wireless WAN Manager Click Help Inserting/Removing the Hard Disk Drive Hard Disk Drive CF-52 Series Insert/Remove the hard disk drive  To insert Insert the Battery Pack Replacing the Battery Pack Hard Disk Drive Starting the Setup Utility Setup UtilityWhen you start the Setup Utility with Supervisor Password When you start the Setup Utility with User Password Main Configuration Bios InformationMain Menu Product Information Setup Utility LED Advanced Menu LAN Peripheral Configuration Boot Menu To change the boot order Boot Option PrioritiesSecurity Menu Boot Prompt Configuration Boot Override Exit MenuSave Options Icon Enlarger Loupe Utility Using the Loupe UtilityActivating the Loupe Utility Click Start*1 All Programs Panasonic Loupe Utility Click OK Setting the Loupe Utility Autorun Window shape Hardware that can be checked using the PC-Diagnostic Utility Hardware Diagnostics Operations Touch pad operations Internal keyboard operations Regarding the PC-Diagnostic Utility Diagnostic Utility Running the Diagnostic CheckConnect the AC adaptor, and turn on the wireless switch Press «F9» T E Click to start the diagnostic check Hard Disk Backup/Restore Function Creating a Backup of the Hard Disk DataRestoring the Hard Disk Data If you backup your files, click Back up now Start up System Recovery Options To perform from Advanced Boot Options Click Restart Input the password, then click OK Click Next Select OS 32 bit or 64 bit Select the disc type Recovery Disc Creation Utility Click OK Click OK on All recovery discs complete. screen Preparation Hard Disk Data Erase Utility After erasing is completed, click OK Network Connections and Communications Software Technical InformationAbout Windows-related files For localized OS model Technical Information Technical Information Error Message Error MessageSolution Troubleshooting Advanced Shut DownDisplay Sound Sleep*1 and Hibernation Troubleshooting Advanced Disc Operation Keyboard Network  Disable the Wireless Connection Disable Utility  Wireless Switch Utility Connecting Peripherals Troubleshooting Advanced Touch Pad / Touchscreen only for model with touchscreen  Perform the Touchscreen Calibration PC Card / ExpressCard only for model with ExpressCard slot SD Memory Card Smart Card only for model with Smart Card slotFingerprint Reader only for model with Fingerprint Reader Troubleshooting Advanced Troubleshooting Advanced Troubleshooting Advanced Others To save the information as a text file Checking the Computer’s Usage Status To save a copy of the screen as an image file