9

Chapter 3

Access Point Setup
This Chapter provides details of the Setup process for Basic Operation of
your WAP-0005, PoE Wireless Access Point.

Overview

This chapter describes the setup procedure to make WAP-0005 a valid device on your LAN,
and to function as an Access Point for your Wireless Stations.
Wireless Stations may also require configuration. For details, see Chapter 4 - Wireless Station
Configuration.
WAP-0005 can be configured using either the supplied Windows utility or your Web Browser

Setup using the Windows Utility

A simple Windows setup utility is supplied on the CD-ROM. This utility can be used to assign
a suitable IP address to WAP-0005. Using this utility is recommended, because it can locate
the Wireless Access Point even if it has an invalid IP address.
Installation
1. Insert the supplied CD-ROM in your drive.
2. If the utility does not start automatically, run the SETUP program in the root folder.
3. Follow the prompts to complete the installation.
Main Screen
• Start the program by using the icon created by the setup program.
• When run, the program searches the network for all active Wireless Access Points, and
then lists them on screen, as shown by the example below.
Figure 6: Management utility Screen
3