2Click the plus sign (+) beside Universal Serial Bus Controller.

If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.

For more information, see the computer documentation.

Solving printer power problems

The printer and the computer cannot exchange data.

These are possible solutions. Try one or more of the following:

MAKE SURE THE PRINTER POWER SUPPLY IS ATTACHED CORRECTLY

1Press to turn the printer off.

2Disconnect the power cord from the wall outlet.

3Remove the power supply from the printer.

4Reconnect the power supply to the printer.

5Plug the power cord into the wall outlet.

6Press to turn the printer on.

MAKE SURE THE PRINTER IS NOT IN SLEEP MODE

If the power light is blinking on and off slowly, then the printer is in sleep mode.

1Unplug the power cord from the wall outlet.

2Wait ten seconds, and then insert the power cord into the wall outlet.

3Press to turn the printer on.

56

Page 56
Image 56
Lexmark 2600 manual Solving printer power problems, Make Sure the Printer Power Supply is Attached Correctly