Change the photo size to match the size of the paper loaded in the printer, or change the paper size to match the photo size.
PictBridge Communication Error
Remove and then reinsert the USB cable that came with the camera into the PictBridge port on the front of the printer.
Invalid Device
The device attached to the printer is not supported.
Attach a supported device, or use other printer features.
There is a problem reading the memory card.
•See “Memory card cannot be inserted” on page 140.
•See “Nothing happens when memory card is inserted” on page 140.
Saving settings
In a setting menu, an * appears next to the default setting. To change the setting:
1From the control panel, press or
repeatedly to choose Copy, Photo, Print Files, Scan, Setup, or Maintenance.
2Press .
3Press or
, or press
or
repeatedly to choose the setting you want.
4Press to select each setting you want.
Note: Pressing also shows a preview in the Copy mode.
5Press while Yes is highlighted, or press
repeatedly to save all temporary settings and return to the main menu. An * appears next to the saved setting.
Note: The printer reverts to the default setting after two minutes of inactivity or if the printer is turned off. The Photo settings will not time out after two minutes of inactivity or turning off the power but will return to the default settings when a memory card or flash drive is removed.
Related topics:
•“Using the control panel” on page 78
Removing and reinstalling the software
If the printer is not functioning properly, or if a communications error message appears when you try to use the printer, you may need to remove and reinstall the printer software.
1Close all open software applications.
2From the Finder desktop,
3
4Follow the instructions on the computer screen to remove the printer software.
5Restart the computer before reinstalling the printer software.
6Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
Troubleshooting