![](/images/new-backgrounds/1103232/103232123x1.webp)
Notes:
•Make sure the
•The printer reads only one media device at a time.
Warning: Do not touch the USB cable, any network adapter, or the printer in the area shown while actively printing from a
3If the PictBridge connection is successful, the following message appears on the display: Camera Connected.
Refer to Camera display or Camera owners manual for further information.
After a few seconds, the following message appears: Use Camera to choose and print photos.
Press
to select printer default settings.
4If you want to use the camera to control printing photos, see the instructions in the camera documentation.
Press on the control panel to specify the PictBridge default print settings, which are used if no selections are made on the camera.
Related topics:
•“Understanding the PictBridge Default Print Settings menu” on page 81
Printing photos from a digital camera using DPOF
Digital Print Order Format (DPOF) is a feature available on some digital cameras. If your camera supports DPOF, you can specify which photos to print, how many of each, and print settings while the memory card is still in the camera. The printer recognizes these settings when you insert the memory card into the printer.
Note: If you specified a photo size while the memory card is still in the camera, make sure the size of the paper loaded in the printer is not smaller than the size you specified in the DPOF selection.
1Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)
2Insert a memory card.
3From the control panel, press .
4Press repeatedly until Print Camera Selections is highlighted.
5Press .
6Press again.
Working with photos
62