Lexmark 4800 manual Cropping photos using the software, Click, Select Auto-crop sensitivity

From here	Go to	To
Adjustments tab	Brightness	Adjust the lightness and darkness of the scanned image.
	Contrast	Adjust the tone of the image as it is set off against a light or
		dark background.
	Gamma	Increase or decrease the color correction curve. Enabling
		gamma lets you adjust the amount of ink on the page.
	Blur/Sharpen	Adjust the level of sharpness of the scanned image.
	Rotate Image	Rotates the image 90 degrees clockwise per click.
	Invert Colors	Reverse the colors of the image by inverting the RGB data.
		The effect created is similar to that of a film negative.
	Mirror	Produce a mirror image of the document or image.
	Defaults	Reset the Adjustment controls to the factory default settings.
Preview area		See a preview of the image. Some settings in the dialog are
		interactive, so you can readily view the changes on the
		image as you adjust the settings. Clicking	re-scans the
		original document and shows the recent changes in the
		Preview area.
	Auto-crop sensitivity	Select or clear Auto-crop sensitivity to activate or deactivate
		auto-cropping. Adjust the slider to adjust cropping
		sensitivity.
	Width, height, and file size	See the dimension of the scanned image. Select your
	display	preferred unit of measurement from the pop-up menu.

These buttons are at the top of the Preview area:

Click

To

Show or hide the Scan Settings drawer.

Refresh the image in the Preview area.

Start scanning.

Related topics:

•“Using the All-In-One Center” on page 90

Cropping photos using the software

You can use the Auto-crop feature to highlight certain focal points or to show only a specific portion of an image.

1From the Finder desktop, double-click the Lexmark 4800 Series folder.

2Double-click the Lexmark 4800 Series Center icon.

3From the All-in-One Center dialog, click Preview/Edit.

4Select Auto-crop sensitivity.

Note: Selecting Auto-crop sensitivity automatically selects the area to be scanned.

Scanning

44