98 DLPProjection TV
Troubleshooting Checklist
TTroubleshooting Checklistroubleshooting Checklist
I set a show to Auto-Tune
and it did not.
•Check the Schedule menu and verify that the show is listed as a Reminder.
• Highlight the show under Listings and do the following:
WPress the Menu key on the remote.
WUse the down arrow to highlight Edit Reminder, and press ENTER.
WVerify the Auto-Tune option reads Yes.
• The TV must be On at the scheduled time for Auto-Tune.
• If you have a cable box, check the IR cable.
I set a show with the
Power On TV option and
it did not.
•Check the Schedule menu and verify that the show is listed as a Reminder.
• Highlight the show under Listings and do the following:
WPress the Menu key on the remote.
WUse the down arrow to highlight Edit Reminder, and press ENTER.
WVerify the Power On TV option reads Yes.
A show I set to Record
did not occur.
•Make sure your recorder is turned Off before the recording begins.
• Make sure there is a tape.
• Check the Schedule menu and verify that the show is listed before recording
begins.
• Check the placement of the IR cable in front of your recorder.
I have not received any
Guide listings.
• Listings usually appear within 24 hours after a successful Setup.
• It may take up to a week to fill the Listings grid with the full 8 days of listings.
• If you see a Listings grid with the message "No Listings" displayed you should
start to receive updated program listings within 24 hours. To receive listings:
WMake sure the cable box is left On, if applicable.
WTurn off your recorder when not in use.
• If the message "No data for this screen" is displayed:
WCheck the connections between the TV, cable, antenna, and the IR cable
if using a cable box.
WVerify Setup information under Change System Settings.
WMake sure the cable box is On, if applicable.
WIf this message is still displayed after multiple days, please contact the
LG®Brand Customer Support.
Some channel numbers
in the Guide are incor-
rect.
•You can correct them using Change Channel Display under Setup.