IP8540 User Guide
2.2 AC/DC power adaptor
The IP8540 ships without an AC/DC power adaptor. The IP8540 LAN Ethernet port supports IEEE802.3af PoE
Order Part Number | Model Number | Applicable Region |
|
|
|
TKTN9010201 | USA, Canada, Mexico | |
|
|
|
TKTN9010601 | Europe | |
|
|
|
TKTN9010701 | United Kingdom | |
|
|
|
TKTN9010801 | Australia | |
|
|
|
TKTN9010901 | China | |
|
|
|
TKTN9011001 | South Korea | |
|
|
|
2.3 Optional accessory for wall-mount installation
The IP8540 optionally can be wall mounted; you may wish to order the following part number to ensure secure placement of the handset when phone is wall mounted:
Order Part Number | Part Name |
TKTN9013701 | Handset Holder for Wall Mount |
|
|
2.4 Set-up
Before connecting your new phone, take a moment to consider safety and reliability. Use common sense when locating, connecting and using your IP8540.
∙Locate the phone on a dry level surface. Keep the phone away from the edges of the surface to avoid the phone falling off the edge.
∙Locate cables to avoid damage. For example, do not locate under rugs or carpet. Also, do not locate cables between the desktop and walls where they may be crushed, damaging the insulation.
∙Check the cables regularly and, if damage is noted, disconnect the phone. Contact your local representative for a replacement.
∙Should liquid spill on the Phone, disconnect the unit from power and the network.
∙Do not use during lightning storms. Lightning presents a rare but potential lethal shock hazard.
∙Clean IP8540 with a soft dry cloth; do not use liquid cleaners or sprays.
∙Only attach peripherals specified by
∙Always use caution when connecting to AC power. Use only with a properly grounded standard AC power outlet and the AC/DC adaptor for the unit.
7
