IP LDK-20 Installation Manual

Introduction

 

 

Precaution

Keep the system away from heating appliances and electrical noise generating devices such as fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of the IP LDK-20 System.

This system should be kept free of dust, moisture, high temperature (more than 40 degrees) and vibration, and should not be exposed to direct sunlight.

Never attempt to insert wires, pins, etc. into the system. If the system does not operate properly, the trouble has been repaired by an authorized LG service center.

Do not use benzene, paint thinner, or any abrasive powder to clean the KSU. Wipe it with a soft cloth.

CAUTION

This system should only be installed and serviced by qualified service personnel.

When a failure occurs which exposes any internal parts, disconnect the power supply cord immediately and return this system to your dealer.

To prevent the risk of fire, electric shock or energy hazard, do not expose this product to rain or any type of moisture.

To protect PCB from static electricity, discharge body static before touching connectors and/or components by touching ground or wearing a ground strap.

WARNING

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

2

Page 6
Image 6
LG Electronics IP LDK-20 installation manual Precaution