Troubleshooting
Audio function
No sound. | Check if the audio cable is correctly connected. |
| Check the volume level. |
| Check if the sound source is correctly selected. |
No sound in PIP /POP | Check if the SOUND is ON in the PIP/POP OSD |
mode. | menu. |
Sound is too high | Adjust the TREBLE to an appropriate level. |
pitched or too low | Adjust the BASS to an appropriate level. |
piched. | Select the BBE EFFECT to an appropriate level. |
Sound level is too low. | Check the volume level. |
|
|
Do you see a "CONTROLS LOCKED" message on the screen.
Do you see | You can secure the current control settings, so | |
“CONTROLS LOCKED” | that they cannot be inadvertently changed. You | |
when you push MENU | can unlock the OSD controls at any time by | |
button? | ||
pushing the MENU button and VOL.+ button | ||
| ||
| for 5 seconds: the message “CONTROLS | |
| UNLOCKED” will appear. It is not possible to | |
| configure this function with the remote control | |
| buttons. You can only do so from the monitor. | |
|
|
TV function
TV signal is not | Check the channel system and make sure you |
received. | chose the correct channel system. |
| Check the AUTO CHANNEL function to |
| automatically search the available channels. |
| Check and see if the TV adapter is properly |
| connected between your display and antenna |
| cable. |
Is the sound not | Check if the TV sound is set at ‘MONO’. In |
displayed on the TV | case the TV SOUND is at ‘MONO’, the sound |
channel indication | will not be displayed. |
window? |
|
|
|
A38
