INSTALLATION 15
4 Make sure that the | 3 Connect all the wire harnesses. |
is tightly connected. Position the cover in its place. Insert |
|
and tighten the cover screw .
ENGLISH
4 Push the water supply tube into the hole on the top case and pull it through the backplate.
Assembling the Left Refrigerator Door
Install the left refrigerator door after the right door is installed.
1 Make sure that the plastic sleeve is inserted in the bot- tom of the door. Install the refrigerator door onto the middle hinge.
2Fit the hinge over the hinge lever latch and slot it into place. Rotate the lever clockwise and fasten the hinge.
Hinge Lever Latch
5Hold the water supply connection and gently push in the
collet to connect the water supply line as shown in and
. Insert the tube at least 5/8 inch (15 mm) into the con- nector. Assemble the clip to the joint part for fastening.
Collet