12INSTALLATION
ENGLISH
Removing/Assembling the Doors and Drawers
Removing the doors is always recommended when it is nec- essary to move the refrigerator through a narrow opening.
WARNING
yIf your entrance door is too narrow for the refrigera- tor to pass through, remove the refrigerator doors and move the refrigerator sideways through the doorway.
yUse two or more people to remove and install the refrigerator doors. Failure to do so can result in back or other injury.
yDisconnect the electrical supply to the refrigerator before installing. Failure to do so could result in serious injury or death.
yDo not put hands, feet or other objects into the air vents, base grille, or bottom of the refrigerator. You may be injured or receive an electrical shock.
yBe careful when handling the hinge, base grille and stopper. It may result in injury.
yRemove food and bins from the doors and drawers before detaching.
Removing the Left Refrigerator Door
1The water supply is connected to the upper right part of the rear surface of the refrigerator. Remove the ring in the joint area. Hold the water supply connection and gently push the Collet to detach the water supply line as shown in and .
2Remove the screw from the hinge cover at the top of the refrigerator. Lift the hook (not visible), located at the
bottom of the front side of the cover with a
3Remove the cover and pull out the tube . Disconnect all wire harnesses .
4Rotate the hinge lever counterclockwise . Lift the top hinge free of the hinge lever latch.
Collet
Hinge Lever Latch
NOTE
Detachment of the water supply line is applicable only when detaching the left refrigerator door.
CAUTION
When lifting the hinge free of the latch, be careful that the door does not fall forward.