LG Electronics LGxxxA1C-B3, LGENBOX-01 Cable Usages According to AC Junction Box Locations

Cable Usages According to AC Junction Box Locations

If first AC module connected to AC junction box is on the top left side

Use male transition cable for connection between array and AC junction box.

Seal the trunk male connector of the last AC module using a female endcap.

Male transition cable

* First AC	Female + Female
module	extension cable

	[Female end cap]
Male + Male
extension cable	[Male + Male extension cable]
Female
end cap	[Female + Female extension cable]
* Last AC
module	[Female + Male extension cable]
Female + Male
extension cable

If first AC module connected to AC junction box is on the top right side

Use female transition cable for connection between array and AC junction box.

Seal the trunk female connector of the last AC module using male endcap.

Female transition cable

* First AC

Male + Malemodule extension cable

Female +	[Male end cap]
Female
extension	[Male + Male extension cable]
cable

Male end cap			[Female + Female extension cable]
	* Last AC
	module	Female + Male	[Female + Male extension cable]
		extension cable

If AC module is installed in landscape mode

Place AC modules as illustrated in the following diagram.

Step 1. Connect the AC modules facing each other using trunk cables.

Step 2. Connect the AC modules that do not face each other using extension cables.

Male transition	Female + Male	Female + Male
cable	extension cable	extension cable

* First AC module

* Last AC module

[Female end cap]

[Male transition cable]

[Female + Male extension cable]

[Trunk Male + Trunk female connector]

Female end cap

15