LG Electronics LMX2525971 manual Removing And Replacing Components Cont, Crisper humidity control

REMOVING AND REPLACING COMPONENTS (CONT.)

Crisper humidity control To remove the glass

You can control the amount of humidity in the moisture-sealed crispers. Store vegetables or fruits requiring more or less humidity in separate crispers. Adjust the control to any setting between HIGH and LOW.

•LOW lets moist air out of the crisper for best storage of fruits.

•HIGH keeps moist air in the crisper for best storage of fresh, leafy vegetables.

CAUTION : The glass shelf over the crisper is not firmly secured. Be careful when tilting.

Removing crisper

•To remove, pull the drawer out to full extension.

•Lift the front of the crisper up, then pull it straight out.

•To install, slightly tilt up the front and insert the drawer into the frame and push it back into place.

•Lift up the glass under the crisper cover.

•Pull the glass up and out.

Glide‘N’Serve

The Glide‘N’Serve provides storage space with a variable temperature control that keeps the compartment colder than refrigerator.

This drawer can be used for large party trays, deli items, or beverages.

Controls

The control regulates the air temperature in the drawer. Set control level to COLD (print on surface) to provide normal refrigerator temperature. Use the COLDER (print on surface) setting for meats or other deli items.

NOTE: Cold air directed to the Glide‘N’Serve can decrease refrigerator temperature. Refrigerator control may need to be adjusted.

33