REPLACING THE WATER FILTER
It is recommended that you replace the filter when the water filter indicator reaches 0 or the water dispenser or icemaker noticeably decreases production.
1 Rotate the knob of the old cartridge | 2 Remove the old cartridge. Take the new |
counterclockwise. When the cartridge is | cartridge out of its packaging, and remove the |
released, you will feel it click out of place. | protective cover from the |
NOTE: Replacing the filter causes a small | cartridge handle in its vertical position, and |
amount of water (around 1 oz. or 25 cc) to | firmly push the new filter cartridge into place |
drain. Place a cup under the filter hole to | until it stops. |
contain it. |
|
After replacing the filter, dispense for 2 minutes from the water dispenser to purge the water system. Check the filter for leaks.
1Use the handle to twist the cartridge clockwise about one turn, until the handle is in a horizontal position. You will feel the filter click into place.
NOTE: If the filter will not turn from side to side, it isn’t fully inserted.
LIGHT / FILTER
When the water filter indicator displays the message 0 Filter Month, Hold 3 Seconds, reset the water filter status display and indicator light by pressing and holding the LIGHT/FILTER button for more than 3 seconds.
To purchase replacement water filter cartridges, visit your local appliance dealer or parts distributor.
You can also call
The replacement water filter cartridge’s part number is 5231JA2006A.
36
