• Unhook the tab on the right inside of the chassis at the same time, slightly pull the evaporator toward you until the tab is clear of the slot.

5. To remove the Motor Cover

• Remove 2 securing screw.

• Pull the motor cover out from the chassis carefully.

Motor cover

6.To remove the Cross-Flow Fan

Loosen the screw securing the cross-flow fan to

the fan motor (do not remove).

• Lift up the right side of the cross-flow fan and the fan motor, separate the fan motor from the cross-flow fan.

Remove the left end of the cross-flow fan from the self-aligning bearing.

-38-

Page 38
Image 38
LG Electronics LS-Q096AEL, LS-Q096BBG, LS-Q096ACG, LS-Q076ABL To remove the Motor Cover, To remove the Cross-Flow Fan