Disassembly of the parts (Indoor unit)

Warning :

Disconnect the unit from power supply before making any checks.

Be sure the power switch is set to “OFF”.

To remove the Grille from the Chassis.

Set the up-and-down air discharge louver to open position (horizontally) by finger pressure.

Remove the securing screws.

To remove the Grille, pull the lower left and right side of the grille toward you (slightly tilted) and lift it straight upward.

1.Before removing the control box, be sure to take out the wire screwed at the other end.

 

Display

 

P.C.B

 

Conductor

 

Sensor

 

Conductor

 

Motor

 

Conductor

Earth

Step Motor

Conductor

Conductor

 

Earth

 

Conductor

 

-36-

Page 36
Image 36
LG Electronics LS-Q076ABG, LS-Q096BBG Disassembly of the parts Indoor unit, To remove the Grille from the Chassis