Setup Checklist
4
1. Unpack HD DVR and all accessories.
2. Connect your HD DVR to antenna and TV/Monitor.
See pages 11 - 15.
3. Connect all external video and audio equipment.
See pages 16 - 22.
4. Install batteries in remote control.
See page 10.
5. Plug TV and source equipment into power outlets.
6. Turn HD DVR on.
7. Choose on screen menu language.
See page 34. (English is selected.)
8. Set up TV Guide On Screen™.
See page 54.
8. Use EZ Scan* to search for all channels in your area.
See page 28.
9. Turn video source equipment on.
10. Select viewing source for HD DVR.
See pages 30.
11. Fine-tune source image and sound to personal preference or as required by source.
See pages 26 and 29.
12. Additional features Setup
See Table of Contents.
* EZ Scan/Channel Search Notes -Available Channels/Active Channels/DTV Channels
EZ Scan finds channels which have a signal present and are actively being broadcast. Some broadcast-
ers do not provide or send or broadcast a signal continuously. As a result, some DTV channels may not
be found with EZ Scan. If you know that there is a DTV channel that was not found by EZ Scan, run EZ
Scan again; when the DTV channel is actually sending out a program.
About the symbols used in this manual
Indicates hazards likely to cause harm to the unit itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.