LG Electronics LST-4200A owner manual Connection Panel Overview

Connection Panel Overview

ote

Your HDTV Receiver can be connected to use a TV as the viewing device. Since the receiver has a built-in tuner, a monitor can be used instead for the viewing device.

ANT IN

Connect to HDTV signal source; over-the-air antenna or cable service.

OPTICAL (Digital audio out jack)

Connect to digital (optical) audio equipment.

AUTHORIZED SERVICE ONLY

Reserved for authorized service purposes.

COMPONENT VIDEO OUT

Connect to a TV/Monitor with YPbPr inputs.

Variable AUDIO OUT (Left/Right)

Connect to a TV, Amplifier, Receiver or Stereo System.

AC Power Cord

Plug into the power source.

					DVI OUT
					Connect to a TV with a DVI connector.
				S-VIDEO OUT
				Connect to a TV/Monitor with S-Video inputs.
			VIDEO OUT (MONITOR OUT)
			Connect to a TV/Monitor with Video inputs.
		COAXIAL (Digital audio out jack)
		Connect to digital (coaxial) audio equipment.
	RGB OUT
	Connect to a TV with RGB inputs.
						Do not touch the inner pins of the
ANT LOOP OUT
						jacks on the rear panel.
RF output to TV’s “Antenna In” jack or other devices.						Electrostatic discharge may cause
						permanent damage to the unit.

INTRODUCTION

9