LG Electronics PCS150R setup guide Table of Contents / Setup Checklist

Table of Contents / Setup Checklist

Table of Contents

Safety Warnings	. .	.		2	System Setup	.	.	10 – 12
Important Safety Instructions	. . .	. 3 – 5			PCS150R Configuration Options. . . . . . . 13 – 22
Table of Contents / Setup Checklist . .	.	.	.	6	Troubleshooting / Specifications. .	. . . . 23
PCS150R Product Description . . . .	.	.	. 7		Document Revision History / Notes .	.	.	. 24
Rear and Front Panel Overviews . . .	.	.	.	8	Open Source Software Notice. . .	. . . . 25
Rack Installation	. .	.		9	Warranty	Back Cover

Setup Checklist

Check the items listed below before you begin the PCS150R installation and setup procedures.

ASI Output (Optional)

__ If the system is using ASI ouput, install the modulator and upconverter that will receive the ASI output signal from the PCS150R. Refer to the manufacturer’s documentation.

PCS150R

__ Unpack the PCS150R Pro:Centric™ server unit and all accessories. Accessories provided: Power Cord and Adapter

__ Select the location for mounting the PCS150R. Ensure that adequate ventilation is available.

__ Obtain the necessary attachment hardware to mount the PCS150R chassis in its targeted location.

__ Plan and install the necessary cabling and network (Ethernet) and AC power access for the

PCS150R. You will also need the following to connect a PC directly to the PCS150R for system setup verification purposes:

•DB9 Male-to-DB9 Female RS-232 straight-through serial cable (Example: Cables Unlimited PCM-2100-06 serial cable).

•(Optional) USB 2.0-to-serial DB9 adapter (Example: Cables Unlimited USB-2920 adapter). If there is no serial port on the PC, use the adapter to connect the serial cable to the PC.

__ Carefully follow the installation procedure for the PCS150R (see page 9). __ Complete the system setup for the PCS150R (see pages 10 to 12).

6 206-4157