65
3.1 Add New Device
Pairing is the process that allows
the handset to locate, establish,
and register 1-to-1 connection with
the target device.
For pairing with a new Bluetooth®
device
1. Follow the Bluetooth®accessory
instructions to set the device to
pairing mode.
2. Press the OK Key [MENU].
3. Use the Navigation Wheel
to scroll to SETTINGS & TOOLS,
and press the OK Key .
4. Press [Bluetooth Menu].
5. Press [Add New Device].
Set the desired device to pairing.
6. If Bluetooth®poweris set to off,
you will be prompted to turn
power on. Scroll to Yes and
press the OK Key .
7. The device will appear in Add
New Device menu once it has
been located. Scroll to the device
and press the OK Key .
8. The handset will prompt you for
the passcode. Consult the
Bluetooth®accessory
instructions for the appropriate
passcode (typically “0000”
zeroes). Enter the passcode and
press the OK Key .
9. Once pairing is successful, scroll
to either Always Askor Always
Connectand press the OK Key
to connect with the device.
10. Once connected, you will see
the device listed in the
Bluetooth®Menu and the
Bluetooth®device connected
icon will show up on your
enunciator when connected to
the Bluetooth®device. You can
also check out the connection
with a blue icon on the list.
Icon Reference in Adding New
Device
When the Bluetooth®wireless
connection is built and paired
devices are found, the following
icons are displayed.