Life Fitness 849 manual Same Time

3

1/2 X 6-1/2” 97

2

2

60

70

3/8” BLACK

81 LOCKWASHER

85

3/8 X 1” BUTTON HEAD 87

32

71

77

54

NOTE: TIGHTEN BOTH AT

THE SAME TIME!

34

FIGURE 15

STEP 15:

•SECURELY assemble one 1 X 1” GLIDE (60) to the angle on the BACK PAD ADJUST (2) as shown in FIGURE 15.

•Assemble LEG BACK PAD ADJUST (2) and LEG BACK PAD SUPPORT (3) to the LEG FRAME (34) using one 1/2 X 6-1/2” BOLT (97), two 1/2” FLANGE BEARINGS (70), one 1/2” LOCK NUT (85) as shown in FIGURE 15. (NOTE: Securely tighten, then back nut off 1/4 turn to allow the two parts to rotate freely.)

•SECURELY assemble the LEG CURL/EXTENSION (32) to the LEG FRAME (34) using two 3/4” FLANGE BEARINGS (71), one 3/4” TAPPED SHAFT (77), two black 3/8” LOCK WASHERS (81), and two 3/8 X 1” BLACK BUTTON HEAD CAP SCREWS (87). (NOTE:

Both CAP SCREWS must be tightened at the same time using two allen wrenches.)

•SECURELY assemble one 1-1/4” RUBBER BUMPER (54) to the contact point on the LEG FRAME (34) as shown in FIGURE 15.

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5	6

16