Lifescan OneTouch Ultra manual Setting the Meter Time, Date, and the Unit of Measure, Set the Hour

Setting the Meter Time, Date, and the Unit of Measure

The OneTouch® Ultra® Meter comes with the time and date preset. Check that the time, date, and the unit of measure are set correctly. If you need to change the time, date, or unit of measure; follow the instructions for changing the settings or call the OneTouch® Customer Care Line at 1 800 663-5521. You may also need to enter the setting mode if you remove the battery.

To set the time, date, or unit of measure, you must enter the setting mode. Start with the meter off. Then press and hold the M button for three seconds. The meter is now in the setting mode.

STEP 1 Set the Hour.

With the hour setting flashing, press and release the C button to advance one hour. To move faster, hold the C button down. With the correct hour on the display, press the M button and the minutes setting will start flashing.

Before setting the date, you must have first set the time.

40