Lifescan OneTouch Ultra manual Using the Meter Memory, Enter the Memory Mode

USING THE METER MEMORY

Your OneTouch® Ultra® Meter stores the 150 most recent blood glucose and control solution test results with date and time in its memory. It also provides you with 14- and 30-day averages of your blood glucose test results. Review the test results in memory with these easy steps.

STEP 1 Enter the Memory Mode.

You may enter the memory mode either with the meter turned off or immediately after completing a test. Press the M button. ˘ and the 14-day average will appear with the number of blood glucose tests performed in this period. After three seconds, the 30-day average will appear. (If you are using the meter for the first time, Q indicates there are no test results in memory.)

These averages are calculated from the blood glucose results obtained during the last 14 and 30 calendar days. A S result will be included in your averages as 33.3 mmol/L (600 mg/dL) and a T result as 1.1 mmol/L (20 mg/dL). Results marked as control solution tests will not be included in your averages.

34