A Lantronix Company | SCS3230 System Administrator's Guide |
5:Connecting Equipment to the SCS3230
When connecting devices to the SCS3230, be sure to use Lightwave Communications cables and adapters to ensure the proper transmission of data signals. If a device has an RJ45 serial port, use the manufacturer's cable included with the equipment to convert the RJ45 serial connector to a DB9 or DB25 connector, and then use a Lightwave Communications adapter to convert back to RJ45 to attach to the device port. Directly connecting the RJ45 port on the SCS3230 to the RJ45 port on a third- party device may not allow for the proper transmission of data signals.
SCS3230 serial port default settings
Port Type | Baud Rate | Data Bits | Parity | Stop Bits | Port Configuration |
TERM | 9600 (fixed) | 8 | None | 1 | DCE |
Terminal | 38400 | 8 | None | 1 | DCE |
Device | 9600 | 8 | None | 1 | DCE |
5.1Terminal Card
Terminal Card typical adapters and port configuration:
System Type | Adapter Part Number | Port Configuration |
Wyse 50 / 60 | 200.0066 | DCE |
DEC VT330, PC (25pin) | 200.0067 | DCE |
PC (9pin) | 200.0070 | DCE |
Materials:
∙SCS3230 terminal port
∙terminal or computer with
∙
∙Lightwave adapter for terminal serial port
1.Attach the Lightwave adapter to the terminal or computer serial port.
2.Connect the Cat 5 cable to the adapter. Connect the other end to the SCS3230 terminal port.
3.Turn on the terminal or start the computer’s communication program. Make sure that the communication parameters of the terminal or computer match those of the terminal port.
15.00.038 | - 27 - | May 2002 |
