Lightwave Communications SCS3230 manual Editing a User ID, Listing User IDs

Models: SCS3230

1 97
Download 97 pages 43.74 Kb
Page 61
Image 61

A Lantronix Company

SCS3230 System Administrator's Guide

sys admin>>ADDUSER

Number of available user records: 200

Number of users defined: 0 Enter user id USER ID > tom

Enter case sensitive password PASSWORD > ****

Re-enter case sensitive password PASSWORD > ****

0-17 MAX CONCURRENT LOGINS: 1> 2

Allowed devices example: 1-5,10 DEVICES 0 > 1-4

Allowed listen devices example: 1-5,10 DEVICES 0 > 0 Allow user to clear device buffer (Y/N) YES > n Clear screen after a command (Y/N) YES > n

Enter user id USER ID >

Sys admin>>

The above procedure has defined one user. The SCS3230 will prompt for the next user ID to be defined. Repeat the set-up process until all users have been entered. To return to the sys admin prompt, simply press <ENTER> at the USER ID> prompt. More users may be added at any time by using the ADDUSER command. A maximum of 200 users may be defined.

7.2Editing a User ID

sys admin>>EDITUSER TOM Enter accepts present value

Enter case sensitive password PASSWORD > 0-17 MAX CONCURRENT LOGINS: 2>6

Allowed devices example: 1-5,10 DEVICES 1-4 >

Allowed listen devices example: 1-5,10 DEVICES 0 > Allow user to clear device buffer (Y/N) YES > n Clear screen after a command (Y/N) NO > n

sys admin>>

To edit or change parameters for a particular user after defining that user ID, use the EDITUSER command. For example, if the user 'Tom' needed to have more concurrent login capabilities, the sys admin would type EDITUSER TOM on the command line. As each line comes up, change the settings and press <ENTER>, or press <ENTER> to accept the current setting.

NOTE: When editing any group of parameters, pressing the <ENTER> key will accept the current value and move to the next parameter in the list.

7.3Listing User IDs

To list the users that have been defined, use the LISTUSERS command. When used alone, the command will display all user ID’s. When a user ID is specified after the command, the parameters for that user ID will be displayed. If the /ALL qualifier is

15.00.038

- 61 -

May 2002

Page 61
Image 61
Lightwave Communications SCS3230 manual Editing a User ID, Listing User IDs