ConsoleServer 3200 System | Lightwave Communications |
Standard DB9 or DB25 installation:
Materials:
∙SCS3230 device port
∙device with
∙
∙Lightwave adapter for serial console port
1.Attach the Lightwave adapter to the serial console port.
2.Connect the Cat 5 cable to the adapter. Connect the other end to the SCS3230 device port.
3.Check that the device port and serial console port communications parameters match, and synchronize them if they do not match.
Sun® Netra t1 installation:
Materials:
1.Connect a Cat 5 cable to the console port of the Netra. Connect the other end to the end of the ConsoleServer/Netra adapter (P/N 200.0225) marked “to Netra”.
2.Connect another Cat 5 cable between the adapter end marked “ConsoleServer” and the ConsoleServer device port.
3.Check that the device port and serial console port communications parameters match, and synchronize them if they do not match.
Rev. A | - 30 - | www.lightwavecom.com |
