Lightwave Communications SCS3230 manual Logging Out, Checking Connections, Connection Info Screen

ConsoleServer 3200 System Lightwave Communications

alphanumeric characters and is case-sensitive) at this prompt and press <ENTER>. After entering the new password, the user will be asked to verify the new password by the prompt PLEASE VERIFY PASSWORD. The user should enter the new password again at this prompt exactly as it was typed the first time and press <ENTER>. If both new password entries match, the SCS3230 will display New password accepted. on the screen and return to the user prompt. If the new entries do not match, the message New and verify password mismatch is displayed, the new password is rejected, and the old password remains valid. The SCS3230 will also reject a new password if the incorrect password is entered when prompted for the old password, or if the new password is the same as the old password.

8.6Logging Out

A user may logout at any time that commands may be made to the SCS3230 by typing LOGOUT, LOGOFF, or by selecting LOGOUT from a pull-down menu. When a user is connected to a server and they logout, the connection to that server will be broken and any other users that are listening to that session will lose their connection to that server as well.

8.7Checking Connections

CONNECTION INFO SCREEN

+---------------------------------------------------------------------------				+
¦		CONNECTION INFO		¦
+---------------------------------------------------------------------------				¦
¦01 - TEST	00	-	User logged-in	¦
¦02 -	00	-	Channel present	¦
¦03 -	00	-	Channel present	¦
¦04 -	00	-	Channel present	¦
¦05 -	00	-	Channel present	¦
¦06 -	00	-	Channel present	¦
¦07 -	00	-	Channel present	¦
¦08 -	00	-	Channel present	¦
¦09 -	00	-		¦
¦10 -	00	-		¦
¦11 -	00	-		¦
¦12 -	00	-		¦
¦13 -	00	-		¦
¦14 -	00	-		¦
¦15 -	00	-		¦
¦16 -	00	-		¦
¦17 -	00	-		¦
+---------------------------------------------------------------------------				+

Press Any Key To Continue ....

Only one user at a time may connect to a device on the SCS3230, except when using listen mode (see Section 7.9, Listening to a Server Session for more details). Before attempting to select a device port, the user may desire to check if the device port is free. The CONNECTIONS command allows the user to list the users that are logged in, which devices they have currently selected, and which mode they are in. Users may also view this information by selecting DISPLAY CONNECTED LIST from the pull-down menu when logged in.

Rev. A - 80 - www.lightwavecom.com