Lightwave Communications SCS3230 manual Displaying System Information

A Lantronix Company SCS3230 System Administrator's Guide

10: Displaying System Information

F2 PULL-DOWN MENU TO DISPLAY SYSTEM INFO

+	-----------------	+
¦ LOGGED OUT MENU ¦
+	-----------------	¦
¦	USER LOG IN	¦
¦	SYSTEM INFO	¦
¦	DISPLAY HELP	¦
+	-----------------	+

The user access cards are capable of displaying information about their software and communications settings. This information can be accessed only at the LCI3200> prompt by selecting SYSTEM INFO from the pull-down menu, or typing the command INFO or MISC at the prompt.

The command line INFO/MISC commands are also available at the user prompt USER>.

+	-------------------------------	+
¦	MISC. SYSTEM INFO	¦
+	-------------------------------	¦
¦V2.15 10/01/99		¦
¦TERMINAL SOFTWARE		¦
¦Card Number\Channel = B1		¦
¦38,400 Baud		¦
¦No Parity		¦
¦8 Data Bits		¦
¦1 Stop Bit		¦
¦Software Flow Control		¦
¦Port Type = DCE		¦
+	-------------------------------	+

Press Any Key To Continue ....

The system information appears in a pop-up window. The first two lines show the version of the software in flash memory and the type of software. The third line shows the position of the terminal or network card in the SCS3230 chassis. The next six lines show the current communication settings for the port. Pressing any key that sends a character through the terminal exits the window.

15.00.038 - 89 - May 2002