Lightwave Communications SCS3230 manual Monitor A.K.A. Device Mode Help

ConsoleServer 3200 SystemLightwave Communications

MONITOR (A.K.A. DEVICE) MODE HELP:

F1 - Display Help Screen		(VT100 mode)
F2 - Display Pull Down Menu (VT100 mode)
TTY COMMANDS: (MONITOR MODE)
LOGOUT,LOGOFF	-	Logout
SELECT [SERVER NAME\#]	-	Select a server by name or number
LISTEN [SERVER NAME\#]	-	Listen to a server by name or number
DISELECT[SERVER NAME\#] -		Select a server and enter direct mode
EXIT	-	Deselect from a server
DEVLIST	-	Display installed devices list
TOP	-	Go to begining of device buffer
BOTTOM	-	Go to end of device buffer
NEXT	-	Display next page of device data
PREVIOUS	-	Display previous page of device data
FORWARD [n LINES]	-	Go forward n lines and display page
REVERSE [n LINES]	-	Go reverse n lines and display page
CAT	-	Display entire contents of device buffer
CAFILTER	-	Display entire contents of device buffer with
		filter
CLEAR	-	Clear device buffer
DIRECT	-	Enter direct mode

The user may see a complete list of available commands at any prompt by typing HELP, H, or ? and pressing <ENTER>, by pressing <F1>, or by selecting DISPLAY HELP SCREEN from a pull-down menu. To use the pull-down menu of commands available at each user level, the user may press <F2> or <CTRL>+D. By using the up and down arrow keys, the user may move the highlight bar to the desired command, and then press <ENTER> to select that command. The user may use the <F1> and <F2> keys only if the terminal or terminal emulation supports VT100 function keys. If the terminal or emulation program does not support VT100 function keys, then the user may press the <CTRL> and D key simultaneously to use the pull-down menu. To exit from a menu without selecting a command, press <ESC><ESC> or <CTRL>+C.

Pressing <CTRL>+U (the control and U key simultaneously) will erase all typed commands on the current command line back to the system prompt. Pressing <CTRL>+R retypes the last command executed and waits for the user to hit <ENTER> to execute it.

Use <CTRL>+F for the down arrow and <CTRL>+E for the up arrow.

Most commands may be abbreviated to one extent or another. See Appendix E for allowed abbreviations.

Rev. A - 78 - www.lightwavecom.com