Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
TROUBLESHOOTING & REPAIR
ENGINE/ROTOR REMOVAL AND REPLACEMENT
WARNING
Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty. For your safety and to avoid elec- trical shock, please observe all safety notes and precautions detailed throughout this manu- al.
If for any reason you do not understand the test procedures or are unable to perform the test/repairs safely, contact the Lincoln Electric Service Department for electrical trou- bleshooting assistance before you proceed. Call
DESCRIPTION
The following procedure will aid the technician in removing the engine and/or rotor for main- tenance or replacement of either component.
NOTE: The procedures described here are for a Kohler engine. The same basic procedures apply to the Onan engine, although there may be a few slight wiring variations.
MATERIALS NEEDED
Lincoln Electric Rotor Removal Kit (S20788) - FOR ROTOR REMOVAL ONLY
1/4” nut driver 5/16” nut driver
Slot head screw driver 3/8” wrench
7/16” wrench 1/2” wrench 9/16” wrench 5/8” wrench Locking pliers Needle nose pliers Diagonal cutters Impact wrench Torque wrench (ft lbs) Feeler gauge (.017)
INSTRUCTIONS
For Engine and Rotor removal only, follow steps
For rotor removal, follow the ENGINE AND ROTOR REMOVAL PROCEDURE and ROTOR REMOVAL PROCEDURE.
This procedure takes approximately 3 hours to perform.
