Linksys E3000
Create or Edit an FTP Folder
Use this screen to add an FTP folder..
FTP Folder Screen
Display Name Create a name for the folder.. Enter a display name that will appear in the Access table of the FTP Server screen..
Partition The name of the partition is displayed.. Location The location of the folder is displayed..
New Folder Type in a new folder name if you want to create a new subfolder in the current location.. Then click
Create..
Share entire Partition Select this option if you want to share the entire partition with your FTP clients.. If your disk doesn’t have multiple partitions, selecting this option will share the entire disk.. If you do not want to share the entire partition, then select the folder you do want to share..
Current Folder The current folder is displayed.. Folder The available folders are listed by Folder name.. Enter into Folder To display subfolders, click this button.. Select Select a folder..
Return to Upper Folder To return to the previous folder, click this button..
Access
Specify which user groups have
Available Groups To allow a group access to the folder, select it, and then click the >> button..
Groups with Access To block a group from accessing the folder, select it, and then click the << button..
Chapter 3: Advanced Configuration
Click Save Settings to apply your changes, or click Cancel Changes to clear your changes.. Click Close to exit the screen..
On the FTP Server screen, click Save Settings to apply your changes, or click Cancel Changes to clear your changes..
Storage > Administration
The Administration screen allows you to manage the user groups and individual users who can access the shared folders..
Storage > Administration
Information
Server Name The default server name of the Router is Ciscoxxxxx.. XXXXX represents the last 5 digits of your serial number.. This can be found on the bottom of the router..
NOTE: If you used the setup software for installation, then the name of your wireless network (up to 15 characters) is the server name of the Router..
Workgroup Name Enter the workgroup name for the Router; it should match the workgroup name of the computers on your local network.. The Router’s default is workgroup..
Server LAN IP Address The local IP address of the Router’s media and FTP server is displayed..
Server Internet IP Address The Internet IP address of the Router’s FTP server is displayed..
High Performance | 31 |
