Linksys manual Wireless Wireless MAC Filter, Wireless Advanced Wireless Settings, Linksys E3000

Models: E3000

1 80
Download 80 pages 18.96 Kb
Page 27
Image 27
Wireless > Wireless MAC Filter

Linksys E3000

Wireless > Wireless MAC Filter

Wireless access can be filtered (restricted) by specifying the MAC addresses of the devices in your wireless network..

Wireless > Wireless MAC Filter

Wireless MAC Filter

Enabled/Disabled  To filter wireless users by the MAC addresses of their computers or devices, select Enabled.. Otherwise, keep the default, Disabled..

Access Restriction

Prevent  When the Wireless Mac Filter is enabled and this option is selected, PCs listed in the MAC Address filter list will be prevented from accessing the wireless network..

Permit  When the Wireless Mac Filter is enabled and this option is selected, only PCs listed in the MAC Address filter list will be granted access to the wireless network..

MAC Address Filter List

Wireless Client List  Click this to open the Wireless Client List screen..

Wireless Client List

Chapter 3: Advanced Configuration

Wireless Client List

This screen shows computers and other devices on the wireless network.. The list can be sorted by Client Name, Interface, IP Address, MAC Address, and Status..

Select Save to MAC Address Filter List for any device you want to add to the MAC Address Filter List.. Then click Add..

To update the on-screen information, click Refresh.. To exit this screen and return to the Wireless MAC Filter screen, click Close..

MAC 01-32 Enter the MAC addresses of the devices whose wireless access you want to control..

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes..

Wireless > Advanced Wireless Settings

The Advanced Wireless Settings screen is used to set up the Router’s advanced wireless functions.. These settings should only be adjusted by an advanced user because incorrect settings can reduce wireless performance.. In most cases, keep the default settings..

Wireless > Advanced Wireless Settings

5 GHz and 2..4 GHz Advanced Wireless

AP Isolation  This isolates all wireless clients and wireless devices on your network from each other.. Wireless devices will be able to communicate with the Router but not with each other.. To use this function, select Enabled.. AP Isolation is disabled by default..

High Performance Wireless-N Router

24

Page 27
Image 27
Linksys E3000 manual Wireless Wireless MAC Filter, Wireless Advanced Wireless Settings, GHz and 2..4 GHz Advanced Wireless