Linksys Storage FTP Server, Access, Add a Media Folder, Linksys E3000, Advanced Configuration

Linksys E3000

Add a Media Folder

Use this screen to add a media folder..

Media Folder

Media Folder

Display Name  Create a name for the folder.. This will appear in the Database table on the Media Server screen..

Partition  The name of the partition is displayed.. Location  The location of the folder is displayed..

New Folder  Type in a new folder name if you want to create a new subfolder in the current location.. Then click Create..

Share entire Partition  Select this option if you want to share the entire partition with your UPnP AV devices.. If your disk doesn’t have multiple partitions, selecting this option will share the entire disk.. If you do not want to share the entire partition, then select the folder you do want to share..

Current Folder  The current folder is displayed..

Folder Name  The available folders are listed by Folder Name..

Enter into Folder  To display subfolders, click this button.. Select  Select a folder..

Return to Upper Folder  To return to the previous folder, click this button..

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes.. Click Close to exit the screen..

On the Media Server screen, click Save Settings to apply your changes, or click Cancel Changes to clear your changes..

Chapter 3: Advanced Configuration

Storage > FTP Server

The Storage options are available when a USB drive is connected to the USB port of the Router..

The FTP Server tab creates an FTP server that can be accessed from the Internet or your local network..

Storage> FTP Server

Setup

Server Name  The default server name of the Router is CiscoHotspotxxxxx..

FTP Server  Select Enabled to use the Router as an FTP server.. Otherwise, select Disabled.. An external USB hard drive or USB disk must be connected to the USB port to use this service..

Internet Access  Select Enabled to allow access of the FTP server from the Internet.. Otherwise, select Disabled to only allow local network access..

FTP Port  Enter the FTP Port number to use.. The default is 21..

Access

This section lets you add FTP folders that can be accessed through the FTP client..

Specify Folder to Access  To add an FTP folder to the Access table, click this button.. The FTP Folder screen appears.. Proceed to Create or Edit an FTP Folder, page 30..

Summary  To view a list of FTP folders, click this option..

For each FTP folder, the Display Name, Partition, and Folder location are displayed..

The database table lists the FTP folders with the following information: Display Name, Partition, and Folder..

Edit  To change the access settings of an FTP folder, click this option, and the FTP Folder screen appears.. Proceed to Create or Edit an FTP Folder, page 31..

Delete  To delete an FTP folder, click this option..

High Performance Wireless-N Router 30