3.The power LED will flash, alternating between blue and purple. For the initial charge, allow the battery to charge for at least 10 hours, so the battery will have a full charge, which is indicated by a solidly lit power LED. This maximizes battery performance and life.

NOTE: When the battery is low on power, it will emit one warning sound or vibration, unless the Ring Type is set to Silent. (For more information about Ring Types, refer to Chapter 4: Configuring the Wireless-G IP Phone.”)

When the battery is fully charged, proceed to “Navigating the Wireless-G IP Phone.”

Chapter 3: Installing and Using the Wireless-G IP Phone

Wireless-G IP Phone

9

Powering on the Wireless-G IP Phone

Page 17
Image 17
Linksys WIP330 manual Wireless-G IP Phone