Wireless-G IP Phone
Profiles
You will see a list of profiles (when you have profiles already configured). Select Option to see menu choices. Select Exit to return to the previous menu.
You can designate the order of the profiles saved by the IP Phone. The next time it is powered on, it will use the first profile to automatically connect to the profile’s wireless network. If that network is not available, the IP Phone will try the next profile. This will continue until it has connected to a wireless network.
Option
You have these choices: Edit (available when you have at least one existing profile), Add, Delete (available when you have at least one existing profile), Connect, Go Down/Up (available when you have more than one profile), and Save <network name> (available when the IP Phone is connected to a network lacking a profile). The Edit and Add options configure the same settings. The Edit option is used for changing existing profiles, while the Add option is used for creating new profiles. Select Return to return to the previous menu.
Edit. Select Edit to edit a profile’s information: SSID (wireless network name), Wireless Mode, Authentication Mode, and Encryption. (Additional setting may be available depending on the encryption used.) Scroll through these choices, and select Edit to change a setting.
SSID. To change the SSID, select Edit. Enter the new SSID in the new window. Press the center selection key to save the new information, or select Exit to return to the previous menu.
Wireless Mode. You have a choice of Infrastructure and Ad hoc modes. To change the Wireless Mode, select Edit.
Figure 4-32: Wi-Fi
Profiles
Figure 4-34: Edit
Wireless Mode
Figure 4-33: Edit SSID
ssid (service set identifier): your wireless network’s name.
infrastructure: a wireless network that is bridged to a wired network via an access point.
40
Chapter 4: Configuring the
